1. Preparation – Cleaning
Use LOCTITE SF 790 to remove any old adhesive from parts. Use LOCTITE SF 7070 to degrease and clean surfaces prior to applying adhesive. For gaps larger than 0.5mm or worn out shafts, bearing seats or keyways, use LOCTITE metal-filled compounds to rebuild the surfaces.
2. Preparation – Activation
If cure speed is too slow due to passive metals (stainless steel, aluminum and plated metals) or low temperature (below 5°C), use LOCTITE SF 7649 activator. Allow to dry.
3. Application – For Slip-Fitted Assemblies
Apply adhesive around the leading edge of the male component and the inside of the female component. Assemble parts with a rotating motion to ensure good coverage. Wipe off excess adhesive.
4. Application – For Press-Fitted Assemblies
Apply 360 degree beads of adhesive to both bond surfaces at the leading edges of insertion or engagement, and assemble at high press-on rates. Wipe off excess adhesive.
5. Application – For Shrink-Fitted Assemblies
Apply the adhesive onto the male component, heat the female component to cause expansion for free assembly. Assemble components and allow temperatures to equiliberiate. Wipe of excess adhesive.
6. Disassembly
Apply localized heat to approximately 500°F/260°C and disassemble while hot.
admin –
Sản phẩm dùng chất lượng, hàng giao đúng mô tả, shop tư vấn nhiệt tình. Mọi người mua hàng ủng hộ tại shop này nhá.
Mr Tom –
Sản phẩm nhìn đẹp, chất lượng tốt, giao hàng nhanh.
Anh Phong –
Shop tư vấn nhiệt tình, shop bán hàng vui vẻ, giao hàng nhanh, đóng gói đẹp.
Ms Dung –
Sản phẩm dùng tốt, đóng gói đẹp. Sẽ ủng hộ shop lâu dài.
Anh Bình –
Tư vấn sản phẩm rõ ràng, thái độ nhiệt tình, shop tận tâm tư vấn. Chúc shop mua bán nhiều thuận lợi.
Mc Kendy –
Giao hàng nhanh, đóng gói đẹp, chất lượng sản phẩm quá tốt.
Supplies Hà Tiên –
The product meets the requirements, good quality. Beautiful packaging.
Purchases Trường Thọ –
Quality products, enthusiastic advice, beautiful packaging, fast delivery.